The Terval is a pilot-controlled regulator for medium and low pressure suitable for use with pre-filtered non-corrosive gases.
This regulator is designed such that the devices listed below are fitted to a single unit :
• The main pressure regulator;
• The emergency regulator "monitor";
• The slam shut valve.
Pilots, valve, seat of these devices are maintained independently.
With this solution it is possible to reduce the dimensions of the pressure reducing unit while maintaining all safety devices at the same time..
The regulator can also be fitted with a built-in silencer without modifying the body..
"Top entry" design allows easy regular maintenance without removing the body from the pipeline.
Two versions are available:
• The TERVAL main regulator is of the fail open type while the monitor is of the fail close type;
• TERVAL R both main regulator and monitor are of the fail close type.
Closing pressure class SG
Maximum working differential pressure
Minimum working differential pressure
Outlet pressure range of Wd
Range of inlet pressure bpu
Available size DN
up to 2.5
up to 5
up to 25 bar
-10 +60°C (lower or higher temperature available on demand)
ANSI 150 RF or RTJ according to ANSI B16.5 and PN16/25/40 according to ISO 7005
VS/AM 65The VS/AM 65 relief valve is a safety device (SBV) which vents gas when the system pressure exceeds the set value due to temporary events such as expansion due to rise in gas temperature or downstream pressure shocks caused by sudden changes of flow rate etc.
HFA - HFB FiltersDry cartridge filter for natural gas, town gas, air, propane and other non-aggressive gases
BF 31BF31 butterfly valves are interception devices for average/low pressure gas pipelines.